Note: Unfortunately the research paper linked in the article is a dead/broken/wrong link. Perhaps the author will update it later.

From the limited coverage, it doesn’t sound like there’s an actual optical drive that utilizes this yet and that it’s just theoretical based on the properties of the material the researchers developed.

I’m not holding my breath, but I would absolutely love to be able to back up my storage system to a single optical disc (even if tens of TBs go unused).

If they could make a R/W version of that, holy crap.

  • mipadaitu@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    10
    ·
    9 months ago

    Bits are probably more useful when talking about specialized storage. Byte usually means 8 bits, but doesn’t always need to, and not all data is stored in byte chunks.

    A bit is the smallest piece of usable datum, so that makes sense when discussing this technology.

    • Yawweee877h444@lemmy.world
      link
      fedilink
      English
      arrow-up
      17
      ·
      9 months ago

      Sorry to be that guy, but in this context byte is strictly defined as 8 bits, never anything else. It’s a strict definition in digital.

      • davidgro@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        9 months ago

        While I strongly agree with the idea behind your comment and gave you an upvote, at the physical layer it’s not strictly true - especially for optical discs. See https://en.wikipedia.org/wiki/Eight-to-fourteen_modulation for example.

        That said, capacity listings should always be the capacity of the data that can be stored and retrieved as seen by the user, and that data would be in 8-bit bytes.

      • Prizephitah@feddit.nu
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        6
        ·
        edit-2
        9 months ago

        That’s not true either. Byte can be both powers of 10 and powers of 2. When talking about storage devices like hard drives etc. we usually refer to them in powers of 10, but OS’s usually do it in powers of 2. That’s why your hard drive looks smaller than advertised.

        Bits are used for flash memory as individual chips. Assembled devices such as RAM and memory cards are advertised in bytes. I’m imagining that the same goes for hard drive platters and possibly disc media as well.

        • Setarkus.LW@lemmy.world
          link
          fedilink
          English
          arrow-up
          12
          ·
          9 months ago

          A byte in this context always means 8 bit though, it has nothing to do with powers of 10 or 2. The prefix of K (kilo), M (mega), G (giga) or Ki (kibi), Mi (mebi), Gi (gibi) doesn’t change the meaning of “byte”.

          • PlexSheep@feddit.de
            link
            fedilink
            English
            arrow-up
            3
            ·
            9 months ago

            Yes this is right. There may be confusion happening with binary and metric prefixes.

            For example:

            Kibbibyte (1024 bytes) vs Kilobyte (1000 bytes).