I’m way behind, but I’m trying to learn F#.

I’m using the library Combinatorics in dotnet, which I’ve used in the past, generate in this case every duplicating possibility of the operations. I the only optimization that I did was to use a function to concatenate numbers without converting to strings, but that didn’t actually help much.

I have parser helpers that use ReadOnlySpans over strings to prevent unnecessary allocations. However, here I’m adding to a C# mutable list and then converting to an FSharp (linked) list, which this language is more familiar with. Not optimal, but runtime was pretty good.

I’m not terribly good with F#, but I think I did ok for this challenge.

F#

// in another file:
let concatenateLong (a:Int64) (b:Int64) : Int64 =
    let rec countDigits (n:int64) =
        if n = 0 then 0
        else 1 + countDigits (n / (int64 10))   

    let bDigits = if b = 0 then 1 else countDigits b
    let multiplier = pown 10 bDigits |> int64
    a * multiplier + b

// challenge file
type Operation = {Total:Int64; Inputs:Int64 list }

let parse (s:ReadOnlySpan<char>) : Operation =
    let sep = s.IndexOf(':')
    let total = Int64.Parse(s.Slice(0, sep))
    let inputs = System.Collections.Generic.List<Int64>()
    let right:ReadOnlySpan<char> = s.Slice(sep + 1).Trim()

   // because the Split function on a span returns a SpanSplitEnumerator, which is a ref-struct and can only live on the stack, 
   // I can't use the F# list syntax here
    for range in right.Split(" ") do
        inputs.Add(Int64.Parse(sliceRange right range))
        
    {Total = total; Inputs = List.ofSeq(inputs) }

let part1Ops = [(+); (*)]

let execute ops input =
    input
    |> PSeq.choose (fun op ->
        let total = op.Total
        let inputs = op.Inputs
        let variations = Variations(ops, inputs.Length - 1, GenerateOption.WithRepetition)
        variations
        |> Seq.tryFind (fun v ->
            let calcTotal = (inputs[0], inputs[1..], List.ofSeq(v)) |||> List.fold2 (fun acc n f -> f acc n) 
            calcTotal = total
            )
        |> Option.map(fun _ -> total)
        )
    |> PSeq.fold (fun acc n -> acc + n) 0L

let part1 input =
    (read input parse)
    |> execute part1Ops

let part2Ops = [(+); (*); concatenateLong]

let part2 input = (read input parse) |> execute part2Ops

The Gen0 garbage collection looks absurd, but Gen0 is generally considered “free”.

V2 - concatenate numbers did little for the runtime, but did help with Gen1 garbage, but not the overall allocation.

Uiua

This turned out to be reasonably easy in Uiua, though this solution relies on macros which maybe slow it down.

(edit: removing one macro sped it up quite a bit)

(edit2: Letting Uiua build up an n-dimensional array turned out to be the solution, though sadly my mind only works in 3 dimensions. Now runs against the live data in around 0.3 seconds.)

Try it here

Data   ← ⊜(□⊜⋕⊸(¬∈": "))⊸≠@\n "190: 10 19\n3267: 81 40 27\n83: 17 5\n156: 15 6\n7290: 6 8 6 15\n161011: 16 10 13\n192: 17 8 14\n21037: 9 7 18 13\n292: 11 6 16 20"
Calib! ← ≡◇⊢▽⊸≡◇(∈♭/[^0]:°⊂) # Calibration targets which can be constructed from their values.
&p/+Calib!⊃(+|×)Data
&p/+Calib!⊃(+|×|+×ⁿ:10+1⌊ₙ₁₀,)Data

Haskell

A surprisingly gentle one for the weekend! Avoiding string operations for concatenate got the runtime down below one second on my machine.

import Control.Arrow
import Control.Monad
import Data.List
import Data.Maybe

readInput :: String -> [(Int, [Int])]
readInput = lines >>> map (break (== ':') >>> (read *** map read . words . tail))

equatable :: [Int -> Int -> Int] -> (Int, [Int]) -> Bool
equatable ops (x, y : ys) = elem x $ foldM apply y ys
  where
    apply a y = (\op -> a `op` y) <$> ops

concatenate :: Int -> Int -> Int
concatenate x y = x * mag y + y
  where
    mag z = fromJust $ find (> z) $ iterate (* 10) 10

main = do
  input <- readInput <$> readFile "input07"
  mapM_
    (print . sum . map fst . (`filter` input) . equatable)
    [ [(+), (*)],
      [(+), (*), concatenate]
    ]

Haskell

import Control.Arrow
import Data.Char
import Text.ParserCombinators.ReadP

numP = read <$> munch1 isDigit
parse = endBy ((,) <$> (numP <* string ": ") <*> sepBy numP (char ' ')) (char '\n')

valid n [m] = m == n
valid n (x : xs) = n > 0 && valid (n - x) xs || (n `mod` x) == 0 && valid (n `div` x) xs

part1 = sum . fmap fst . filter (uncurry valid . second reverse)

concatNum r = (+r) . (* 10 ^ digits r)
    where
        digits = succ . floor . logBase 10 . fromIntegral

allPossible [n] = [n]
allPossible (x:xs) = ((x+) <$> rest) ++ ((x*) <$> rest) ++ (concatNum x <$> rest)
    where
        rest = allPossible xs

part2 = sum . fmap fst . filter (uncurry elem . second (allPossible . reverse))

main = getContents >>= print . (part1 &&& part2) . fst . last . readP_to_S parse

Python

It is a tree search

def parse_input(path):

  with path.open("r") as fp:
    lines = fp.read().splitlines()

  roots = [int(line.split(':')[0]) for line in lines]
  node_lists = [[int(x)  for x in line.split(':')[1][1:].split(' ')] for line in lines]

  return roots, node_lists

def construct_tree(root, nodes, include_concat):

  levels = [[] for _ in range(len(nodes)+1)]
  levels[0] = [(str(root), "")]
  # level nodes are tuples of the form (val, operation) where both are str
  # val can be numerical or empty string
  # operation can be *, +, || or empty string

  for indl, level in enumerate(levels[1:], start=1):

    node = nodes[indl-1]

    for elem in levels[indl-1]:

      if elem[0]=='':
        continue

      if elem[0][-len(str(node)):] == str(node) and include_concat:
        levels[indl].append((elem[0][:-len(str(node))], "||"))
      if (a:=int(elem[0]))%(b:=int(node))==0:
        levels[indl].append((str(int(a/b)), '*'))
      if (a:=int(elem[0])) - (b:=int(node))>0:
        levels[indl].append((str(a - b), "+"))

  return levels[-1]

def solve_problem(file_name, include_concat):

  roots, node_lists = parse_input(Path(cwd, file_name))
  valid_roots = []

  for root, nodes in zip(roots, node_lists):

    top = construct_tree(root, nodes[::-1], include_concat)

    if any((x[0]=='1' and x[1]=='*') or (x[0]=='0' and x[1]=='+') or
           (x[0]=='' and x[1]=='||') for x in top):

      valid_roots.append(root)

  return sum(valid_roots)

Uiua

Credits to @mykl@lemmy.world for the approach of using reduce and also how to split the input by multiple characters.
I can happily say that I learned quite a bit today, even though the first part made me frustrated enough that I went searching for other approaches ^^

Part two just needed a simple modification. Changing how the input is parsed and passed to the adapted function took longer than changing the function itself actually.

Run with example input here

PartOne ← (
  &rs ∞ &fo "input-7.txt"
  ⊜□≠@\n.
  ≡◇(⊜□≠@:.)
  ≡⍜⊡⋕0
  ≡⍜(°□⊡1)(⊜⋕≠@ .)
  ⟜(⊡0⍉)

  # own attempt, produces a too low number
  # ≡(:∩°□°⊟
  #   ⍣(⍤.◡⍣(1⍤.(≤/×)⍤.(≥/+),,)0
  #     ⊙¤⋯⇡ⁿ:2-1⊸⧻
  #     ⊞(⍥(⟜⍜(⊙(↙2))(⨬+×⊙°⊟⊡0)
  #         ↘1
  #       )⧻.
  #       ⍤.=0⧻.
  #     )
  #     ∈♭◌
  #   )0)

  # reduce approach found on the programming.dev AoC community by mykl@lemmy.world
  ≡(◇(∈/(◴♭[⊃(+|×)]))⊡0:°⊂)
  °□/+▽
)

PartTwo ← (
  &rs ∞ &fo "input-7.txt"
  ⊜(□⊜⋕¬∈": ".)≠@\n.
  ⟜≡◇⊢
  ≡◇(∈/(◴♭[≡⊃⊃(+|×|⋕$"__")]):°⊂)
  °□/+▽
)

&p "Day 7:"
&pf "Part 1: "
&p PartOne
&pf "Part 2: "
&p PartTwo

Factor

TUPLE: equation value numbers ;
C: <equation> equation

: get-input ( -- equations )
  "vocab:aoc-2024/07/input.txt" utf8 file-lines [
    split-words unclip but-last string>number
    swap [ string>number ] map <equation>
  ] map ;

: possible-quotations ( funcs numbers -- quots )
  dup length 1 -
  swapd all-selections
  [ unclip swap ] dip
  [ zip concat ] with map
  swap '[ _ prefix >quotation ] map ;

: possibly-true? ( funcs equation -- ? )
  [ numbers>> possible-quotations ] [ value>> ] bi
  '[ call( -- n ) _ = ] any? ;

: solve ( funcs -- n )
  get-input
  [ possibly-true? ] with filter
  [ value>> ] map-sum ;

: part1 ( -- n )
  { + * } solve ;

: _|| ( m n -- mn )
  [ number>string ] bi@ append string>number ;

: part2 ( -- n )
  { + * _|| } solve ;

Haskell

I’m not very proud, I copied my code for part two.

import Control.Arrow hiding (first, second)

import qualified Data.List as List
import qualified Data.Char as Char

parseLine l = (n, os)
        where
                n = read . takeWhile (Char.isDigit) $ l
                os = map read . drop 1 . words $ l

parse :: String -> [(Int, [Int])]
parse s = map parseLine . takeWhile (/= "") . lines $ s

insertOperators target (r:rs) = any (target ==) (insertOperators' r rs)
insertOperators' :: Int -> [Int] -> [Int]
insertOperators' acc []     = [acc]
insertOperators' acc (r:rs) = insertOperators' (acc+r) rs ++ insertOperators' (acc*r) rs

insertOperators2 target (r:rs) = any (target ==) (insertOperators2' r rs)
insertOperators2' :: Int -> [Int] -> [Int]
insertOperators2' acc []     = [acc]
insertOperators2' acc (r:rs) = insertOperators2' (acc+r) rs ++ insertOperators2' (acc*r) rs ++ insertOperators2' concatN rs
        where
                concatN = read (show acc ++ show r)

part1 ls = filter (uncurry insertOperators)
        >>> map fst
        >>> sum
        $ ls
part2 ls = filter (uncurry insertOperators2)
        >>> map fst
        >>> sum
        $ ls

main = getContents >>= print . (part1 &&& part2) . parse

C

Big integers and overflow checking, what else is there to say 😅​

#include "common.h"

/* returns 1 on sucess, 0 on overflow */
static int
concat(uint64_t a, uint64_t b, uint64_t *out)
{
	uint64_t mul;

	for (mul=1; mul<=b; mul*=10) ;

	return 
	    !__builtin_mul_overflow( mul, a, out) &&
	    !__builtin_add_overflow(*out, b, out);
}

static int
recur(uint64_t expect, uint64_t acc, uint64_t arr[], int n, int p2)
{
	uint64_t imm;

	return
	    n < 1 ? acc == expect :
	    acc >= expect ? 0 :
	    recur(expect, acc + arr[0], arr+1, n-1, p2) ||
	    recur(expect, acc * arr[0], arr+1, n-1, p2) ||
	    (p2 && concat(acc, arr[0], &imm)
	        && recur(expect, imm, arr+1, n-1, p2));
}

int
main(int argc, char **argv)
{
	char buf[128], *tok, *rest;
	uint64_t p1=0, p2=0, arr[32], expect;
	int n;

	if (argc > 1)
		DISCARD(freopen(argv[1], "r", stdin));
	
	while ((rest = fgets(buf, sizeof(buf), stdin))) {
		assert(strchr(buf, '\n'));
		expect = atoll(strsep(&rest, ":"));

		for (n=0; (tok = strsep(&rest, " ")); n++) {
			assert(n < (int)LEN(arr));
			arr[n] = atoll(tok);
		}

		p1 += recur(expect, 0, arr, n, 0) * expect;
		p2 += recur(expect, 0, arr, n, 1) * expect;
	}

	printf("07: %"PRIu64" %"PRIu64"\n", p1, p2);
	return 0;
}

https://github.com/sjmulder/aoc/blob/master/2024/c/day07.c

J

Didn’t try to make it clever at all, so it’s fairly slow (minutes, not seconds). Maybe rewriting foldl_ops in terms of destructive array update would improve matters, but the biggest problem is that I don’t skip unnecessary calculations (because we’ve already found a match or already reached too big a number). This is concise and follows clearly from the definitions, however.

data_file_name =: '7.data
lines =: cutopen fread data_file_name
NB. parse_line yields a boxed vector of length 2, target ; operands
NB. &. is "under": u &. v is v^:_1 @: u @: v with right rank of v
parse_line =: monad : '(". &. >) (>y) ({.~ ; (}.~ >:)) '':'' i.~ >y'
NB. m foldl_ops n left folds n by the string of binary operators named by m,
NB. as indices into the global operators, the leftmost element of m naming
NB. an operator between the leftmost two elements of n. #m must be #n - 1.
foldl_ops =: dyad define
   if. 1 >: # y do. {. y else.
      (}. x) foldl_ops (((operators @. ({. x))/ 2 {. y) , 2 }. y)
   end.
)
NB. b digit_strings n enumerates i.b^n as right justified digit strings
digit_strings =: dyad : '(y # x) #:"1 0 i. x ^ y'
feasible =: dyad define
   operators =: x  NB. global
   'target operands' =. y
   +./ target = ((# operators) digit_strings (<: # operands)) foldl_ops"1 operands
)
compute =: monad : '+/ ((> @: {.) * (y & feasible))"1 parse_line"0 lines'
result1 =: compute +`*

concat =: , &.: (10 & #.^:_1)
result2 =: compute +`*`concat

Lisp

Could probably go much faster if I kept track of calculations to not repeat, but 4 seconds for part 2 on my old laptop is good enough for me. Also, not really a big change from part 1 to part 2.

(defstruct calibration result inputs)

(defun p1-process-line (line)
  (let ((parts (str:words line)))
    (make-calibration :result (parse-integer (car parts) :junk-allowed t)
                      :inputs (mapcar #'parse-integer (cdr parts)))))

(defun apply-opperators (c opps)
  (let ((accum (car (calibration-inputs c))))
  (loop for o in opps
        for v in (cdr (calibration-inputs c))
        until (> accum (calibration-result c))
        if (eql o 'ADD)
          do (setf accum (+ accum v))
        else if (eql o 'MUL)
          do (setf accum (* accum v))
        else
          do (setf accum (+ v (* accum (expt 10 (1+ (floor (log v 10)))))))
        finally (return accum)
        )))

(defun generate-operators (item-count)
  (labels ((g-rec (c results)
             (if (< c 1)
                 results
                 (g-rec (1- c) (loop for r in results
                                     collect (cons 'ADD r)
                                     collect (cons 'MUL r))))))
    (g-rec (1- item-count) '((ADD) (MUL)))))

(defun generate-ops-hash (c gen-ops)
  (let ((h (make-hash-table)))
    (dotimes (x c)
      (setf (gethash (+ 2 x) h) (funcall gen-ops (+ 1 x))))
    h))

(defun validate-calibration (c ops-h)
  (let ((r (calibration-result c))
        (ops (gethash (length (calibration-inputs c)) ops-h)))
    (loop for o in ops
          for v = (apply-opperators c o)
          when (= v r)
            return t)))

(defun run-p1 (file) 
  (let ((calibrations  (read-file file #'p1-process-line))
        (ops (generate-ops-hash 13 #'generate-operators)))
    (loop for c in calibrations
          when (validate-calibration c ops)
            sum (calibration-result c))))

(defun generate-operators-p2 (item-count)
  (labels ((g-rec (c results)
             (if (< c 1)
                 results
                 (g-rec (1- c) (loop for r in results
                                     collect (cons 'ADD r)
                                     collect (cons 'MUL r)
                                     collect (cons 'CAT r))))))
    (g-rec (1- item-count) '((ADD) (MUL) (CAT)))))

(defun run-p2 (file) 
  (let ((calibrations  (read-file file #'p1-process-line))
        (ops (generate-ops-hash 13 #'generate-operators-p2)))
    (loop for c in calibrations
          when (validate-calibration c ops)
            sum (calibration-result c))))

Java

Today was pretty easy one but for some reason I spent like 20 minutes overthinking part 2 when all it needed was one new else if. I initially through the concatenation operator would take precedence even tho it clearly says “All operators are still evaluated left-to-right” in the instructions…

I’m sure there are optimizations to do but using parallelStreams it only takes around 300ms total on my machine so there’s no point really

import java.io.IOException;
import java.nio.charset.StandardCharsets;
import java.nio.file.Files;
import java.nio.file.Path;
import java.util.Arrays;
import java.util.List;

public class Day7 {
    public static void main(final String[] _args) throws IOException {
        final List<Equation> equations = Files.readAllLines(Path.of("2024\\07\\input.txt"), StandardCharsets.UTF_8).stream()
            .map(line -> line.split(":\\s"))
            .map(line -> new Equation(
                    Long.parseLong(line[0]),
                    Arrays.stream(line[1].split("\\s"))
                        .map(Integer::parseInt)
                        .toArray(Integer[]::new)
                )
            ).toList();

        final char[] part1Operators = {'+', '*'};
        System.out.println("Part 1: " + equations.parallelStream()
            .mapToLong(equation -> getResultIfPossible(equation, part1Operators))
            .sum()
        );

        final char[] part2Operators = {'+', '*', '|'};
        System.out.println("Part 2: " + equations.parallelStream()
            .mapToLong(equation -> getResultIfPossible(equation, part2Operators))
            .sum()
        );
    }

    private static Long getResultIfPossible(final Equation equation, final char[] operators) {
        final var permutations = Math.pow(operators.length, equation.values.length - 1);
        for (int i = 0; i < permutations; i++) {
            long result = equation.values[0];
            int count = i;

            for (int j = 0; j < equation.values.length - 1; j++) {
                // If the result is already larger than the expected one, we can short circuit here to save some time
                if (result > equation.result) {
                    break;
                }

                final char operator = operators[count % operators.length];
                count /= operators.length;

                if (operator == '+') { result += equation.values[j + 1]; }
                else if (operator == '*') { result *= equation.values[j + 1]; }
                else if (operator == '|') { result = Long.parseLong(String.valueOf(result) + String.valueOf(equation.values[j + 1])); }
                else {
                    throw new RuntimeException("Unsupported operator " + operator);
                }
            }

            if (result == equation.result) {
                return result;
            }
        }

        return 0L;
    }

    private static record Equation(long result, Integer[] values) {}
}

C#

public class Day07 : Solver
{
  private ImmutableList<(long, ImmutableList<long>)> equations;

  public void Presolve(string input) {
    equations = input.Trim().Split("\n")
      .Select(line => line.Split(": "))
      .Select(split => (long.Parse(split[0]), split[1].Split(" ").Select(long.Parse).ToImmutableList()))
      .ToImmutableList();
  }

  private bool TrySolveWithConcat(long lhs, long head, ImmutableList<long> tail) {
    var lhs_string = lhs.ToString();
    var head_string = head.ToString();
    return lhs_string.Length > head_string.Length &&
      lhs_string.EndsWith(head_string) &&
      SolveEquation(long.Parse(lhs_string.Substring(0, lhs_string.Length - head_string.Length)), tail, true);
  }

  private bool SolveEquation(long lhs, ImmutableList<long> rhs, bool with_concat = false) {
    if (rhs.Count == 1) return lhs == rhs[0];
    long head = rhs[rhs.Count - 1];
    var tail = rhs.GetRange(0, rhs.Count - 1);
    return (SolveEquation(lhs - head, tail, with_concat))
      || (lhs % head == 0) && SolveEquation(lhs / head, tail, with_concat)
      || with_concat && TrySolveWithConcat(lhs, head, tail);
  }

  public string SolveFirst() => equations
    .Where(eq => SolveEquation(eq.Item1, eq.Item2))
    .Select(eq => eq.Item1)
    .Sum().ToString();
  public string SolveSecond() => equations
    .Where(eq => SolveEquation(eq.Item1, eq.Item2, true))
    .Select(eq => eq.Item1)
    .Sum().ToString();
}

TypeScript

I wrote my own iterator because I’m a big dummy. Also brute forced (~8s). Might be worth adding a cache to skip all the questions that have been computed / done.

import { AdventOfCodeSolutionFunction } from "./solutions";

function MakeCombination<T>(choices: Array<T>, state: Array<number>): Array<T> {
    return state.map((v) => choices[v]);
}

function MakeStateArray(length: number) {
    const newArray = [];
    while (length-- > 0)
        newArray.push(0);

    return newArray;
}

function IncrementState(state: Array<number>, max: number): [state: Array<number>, overflow: boolean] {
    state[0]++;
    for (let index = 0; index < state.length; index++) {
        if (state[index] == max) {
            state[index] = 0;

            if (index + 1 == state.length)
                return [state, true];

            state[index + 1]++;
        }
    }

    return [state, false];
}

function GenerateCombinations<T>(choices: Array<T>, length: number): Array<Array<T>> {
    const states = MakeStateArray(length);
    const combinations: Array<Array<T>> = [];

    let done = false
    while (!done) {
        combinations.push(MakeCombination(choices, states));
        done = IncrementState(states, choices.length)[1];
    }


    return combinations;
}

enum Op {
    MUL = "*",
    ADD = "+",
    CON = "|",
}

function ApplyOp(a: number, b: number, op: Op): number {
    switch (op) {
        case Op.MUL:
            return a * b;
        case Op.ADD:
            return a + b;
        case Op.CON:
            return Number(`${a}${b}`);
    }
}

function ApplyOperatorsToNumbers(numbers: Array<number>, ops: Array<Op>): number {
    let prev = ApplyOp(numbers[0], numbers[1], ops[0]);

    for (let index = 2; index < numbers.length; index++) {
        prev = ApplyOp(prev, numbers[index], ops[index - 1])
    }

    return prev;
}

export const solution_7: AdventOfCodeSolutionFunction = (input) => {
    const numbers = // [{target: 123, numbers: [1, 2, 3, ...]}, ...]
        input.split("\n")
            .map(
                (v) => v.trim()
                    .split(":")
                    .map(v => v.trim().split(" ").map(v => Number(v)))
            ).map(
                (v) => {
                    return { target: v[0][0], numbers: v[1] }
                }
            );

    let part_1 = 0;
    let part_2 = 0;

    for (let index = 0; index < numbers.length; index++) {
        const target = numbers[index].target;
        const numbs = numbers[index].numbers;

        // GenerateCombinations(["+", "*"], 2) => [["+", "+"], ["+", "*"], ["*", "+"], ["*", "*"]]
        const combinations = GenerateCombinations([Op.ADD, Op.MUL], numbs.length - 1); 

        // part 1 calculations
        for (let combinationIndex = 0; combinationIndex < combinations.length; combinationIndex++) {
            const combination = combinations[combinationIndex];
            const result = ApplyOperatorsToNumbers(numbs, combination);
            if (result == target) {
                part_1 += result;
                break;
            }
        }

        const combinations2 = GenerateCombinations([Op.ADD, Op.MUL, Op.CON], numbs.length - 1);

        // part 2 calculations
        for (let combinationIndex = 0; combinationIndex < combinations2.length; combinationIndex++) {
            const combination = combinations2[combinationIndex];
            const result = ApplyOperatorsToNumbers(numbs, combination);
            if (result == target) {
                part_2 += result;
                break;
            }
        }

    }

    return {
        part_1,
        part_2,
    }
}

Python

Takes ~5.3s on my machine to get both outputs. Not sure how to optimize it any further other than running the math in threads? Took me longer than it should have to realize a lot of unnecessary math could be cut if the running total becomes greater than the target while doing the math. Also very happy to see that none of the inputs caused the recursive function to hit Python’s max stack depth.

import argparse
import os


class Calibrations:
    def __init__(self, target, operators) -> None:
        self.operators = operators
        self.target = target
        self.target_found = False

    def do_math(self, numbers, operation) -> int:
        if operation == "+":
            return numbers[0] + numbers[1]
        elif operation == "*":
            return numbers[0] * numbers[1]
        elif operation == "||":
            return int(str(numbers[0]) + str(numbers[1]))

    def all_options(self, numbers, last) -> int:
        if len(numbers) < 1:
            return last
        for j in self.operators:
            # If we found our target already, abort
            # If the last value is greater than the target, abort
            if self.target_found or last > self.target:
                return
            total = self.all_options(
                numbers[1:], self.do_math((last, numbers[0]), j)
            )
            if total == self.target:
                self.target_found = True

    def process_line(self, line) -> int:
        numbers = [int(x) for x in line.split(":")[1].strip().split()]
        self.all_options(numbers[1:], numbers[0])
        if self.target_found:
            return self.target
        return 0


def main() -> None:
    path = os.path.dirname(os.path.abspath(__file__))
    parser = argparse.ArgumentParser(description="Bridge Repair")
    parser.add_argument("filename", help="Path to the input file")
    args = parser.parse_args()
    sum_of_valid = [0, 0]
    with open(f"{path}/{args.filename}", "r") as f:
        for line in f:
            line = line.strip()
            target = int(line.split(":")[0])
            for idx, ops in enumerate([["+", "*"], ["+", "*", "||"]]):
                c = Calibrations(target, ops)
                found = c.process_line(line)
                sum_of_valid[idx] += found
                if found:
                    break
    for i in range(0, 2):
        part = i + 1
        print(
            "The sum of valid calibrations for Part "
            + f"{part} is {sum(sum_of_valid[:part])}"
        )


if __name__ == "__main__":
    main()

https://github.com/stevenviola/advent-of-code-2024