• kirklennon@kbin.social
    link
    fedilink
    arrow-up
    235
    ·
    edit-2
    1 year ago

    The confusing alphabet soup of Wi-Fi versions got renamed. 802.11n became Wi-Fi 4, 802.11ac became Wi-Fi 5, and 802.11ax became Wi-Fi 6. Wi-Fi 7 is still in development so 6 is the best in-use version.

    • mustardman@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      97
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Technically 6E is the best in-use version for compatible devices. Same as WiFi 6 but adds the 6GHz spectrum that was recently unlocked by many regulatory agencies around the world. The 6GHz range is significantly less congested and would have better real-world performance in dense residential areas.

      Edit: A few months ago I stumbled upon this site where the author goes quite in-depth about WiFi and does so in a way that is easy to understand. They debunk/corroborate claims and technologies advertised by manufacturers so it really helps demystify the process of selecting the right WiFi gear.

      • MimicJar@lemmy.world
        link
        fedilink
        English
        arrow-up
        46
        ·
        1 year ago

        It’s funny that WiFi is alphabet soup as the other comment mentioned, they rebranded to a single, simple number…then chucked an E on the end.

        I get how/why, but it’s just funny.

      • Paradox@lemdro.id
        link
        fedilink
        English
        arrow-up
        10
        arrow-down
        1
        ·
        edit-2
        1 year ago

        6E is great, but basically nothing supports it. I got a 6E capable AP from Ubiquiti, and looking at my devices table, basically nothing has ever used the 6GHz radio. My house has a wide variety of devices, many new. The only thing that’s used it is my MacBook

        • mustardman@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          WiFi in its current form will never be better than ethernet for backhaul applications as it is half-duplex. The benefits of the new spectrum are wider bands which makes the real-world speeds closer to the published speeds. Congested frequencies mean the bands must be more narrow, which lowers real-world bandwidth.

    • mr_tyler_durden@lemmy.world
      link
      fedilink
      English
      arrow-up
      30
      ·
      1 year ago

      And then, because they can’t help themselves, they came out with 6E. Honestly I think all standards bodies (USB, HDMI, WiFi) just love making stupid sub-versions that make things even more confusing.

    • Kazumara@feddit.de
      link
      fedilink
      English
      arrow-up
      18
      arrow-down
      2
      ·
      1 year ago

      I’m more confused now than before. I always knew what b, g, n and ac were, but now when people say Wifi 5 or Wifi 6 I don’t know which of the standards it corresponds to.

      • Etienne_Dahu@jlai.lu
        link
        fedilink
        English
        arrow-up
        36
        arrow-down
        2
        ·
        1 year ago

        Just count them, that’s what I do. 1 is a, 2 is b, 3 is g, 4 is n, 5 is ac, 6 is ax.

        • naticus@lemmy.world
          link
          fedilink
          English
          arrow-up
          28
          ·
          edit-2
          1 year ago

          You want to be really confused then? Because b is WiFi 1 and a is WiFi 2. Everything else you said is correct though.

          • Etienne_Dahu@jlai.lu
            link
            fedilink
            English
            arrow-up
            11
            ·
            edit-2
            1 year ago

            Wait, what? How could they do that? The first standard was wifi a, I was there 3000 years ago! These guys have no respect for history! /OldManYellsAtCloud

            Edit: it seems that b and a both came in 1999. Oh well.

              • naticus@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Ugh, yeah I still remember working at a school 20+ years ago trying to figure out why I couldn’t connect to WiFi with a lab full of computers. Amazingly I feel like we’re only just now at a point where WiFi is mature enough that a current system is basically the same experience as twisted pair.

        • Kazumara@feddit.de
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          1 year ago

          Thanks, that actually a good idea.

          I guess I did miss “a”, that was never something I saw on our older APs when I was a teen, only “b”

    • towerful@programming.dev
      link
      fedilink
      English
      arrow-up
      17
      arrow-down
      2
      ·
      1 year ago

      WiFi has literally gone the opposite of USB.
      It used to be obvious what USB speeds were, whereas WiFi was 802.11b or whatever.
      Now we have WiFi 5 or WiFi 6. And we have USB-C PD 10gbps with AltMode

      • hyperhopper@lemmy.ml
        link
        fedilink
        English
        arrow-up
        8
        arrow-down
        1
        ·
        edit-2
        1 year ago

        USB has gotten more complicated and does way more now in more contexts. It charges laptops now, it carries multiplexed displayport signals, it does its own handshake and performs hardware level initialization protocols.

        Meanwhile we’ve been wanting the same thing out of wifi since the start. Nothing’s really changed, we just want it to go faster.

        • towerful@programming.dev
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          Fair point.
          USB doing everything requires significantly more description of what a port can actually do.
          I just wish the USB foundation didn’t go with something that makes it difficult to find devices supporting specific features, and played directly into the marketing “upselling/shrinkflation” thing.
          The ubs3.1, usb3.2, gen1, gen2, 10gbps etc. It’s a LOT, and everything is very similar.

        • anlumo@feddit.de
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          1
          ·
          1 year ago

          You’re thinking of USB-C, not the USB standard. USB PD, Alternative Mode and Thunderbolt aren’t part of the USB spec.

          • hyperhopper@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            No, I’m thinking about the port. Which is what we are talking about. Usb-c, usb-pd, thunderbolt, etc, all use the same port. I can use the same cable in the same port for all of these.

        • mustardman@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          I would add the potential for better range as well from a variety of improvements.

          Newer WiFi standards can take advantage of multiple frequencies in a single link, which allows for fallback on the slower, but longer range, 2.4GHz networks. Beamforming has been available since at least WiFi 5 (802.11ac) and helps connection quality as well. The new 6GHz spectrum is uncongested and gives better performance in areas with high saturation of 2.4GHz and 5GHz networks, such as apartments and highrises.

          • CluelessLemmyng@lemmy.sdf.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Range is definitely not better with 6. 6 has larger bandwidths, and is less congested right now because of all the IoT devices using 2.4 and 5 Ghz bands. This will change eventually. 2.4 still has the best range.

            • mustardman@discuss.tchncs.de
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              WiFi 7 (802.11be) has Multi-Link Operation (MLO) where it uses both 6 GHz, 5 GHz, and 2.4 GHz frequencies simultaneously to always maximize bandwidth at a given range.

      • CantStopStaring@lemmynsfw.com
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        It’s more nuanced than faster speeds. All newer versions of WiFi came with speed improvements but compared with previous versions WiFi 6 speed improvements were comparatively modest. The advantage with WiFi 6 over its predecessors was a focus on improving latency and reliability. The number of supported clients was drastically increased with the implementation of technologies first developed in cell networks. Wireless antennas used to be limited to serving each client one at a time. Now they’ve been given the ability to multitask.

        You can liken it to a restaurant where the cook is the network, the waiter is the wireless antenna, and each customer is a wireless device. With WiFi standards before version 6, the waiter was not very good at their job and once they collected an order, they would give it to the cook and wait for the cook to finish cooking the entire meal before delivering it to the customer and moving on to the next customer. This method was improved in the past by making the waiter quicker which is where we get the speed boosts. You can also improve on this by adding more antennas or “waiters” to the environment but the waiters themselves are still not operating as effectively as they can on an individual level. This is why WiFi 6 is such a major improvement that flies under the radar. The improvement may not be that noticable in a home environment where the antennas only have to serve a limited number of clients but in an environment where hundreds or even thousands of clients are communicating simultaneously, this is a critical improvement. On top of this, the improvements have decreased the rate of packets being dropped and improved latency so even in home environments, a network running on WiFi 6 will be more robust and reliable. WiFi 7 will go back to the old paradigm of significantly increasing speed once again.

    • lnxtx@feddit.nl
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      3
      ·
      1 year ago

      Never heard about Wi-Fi 4. Always ‘n’ letter was advertised.

      Wi-Fi 5 kinda associated with 5 GHz bandwidth, but can be also used on the 2.4 GHz.

      • kirklennon@kbin.social
        link
        fedilink
        arrow-up
        21
        ·
        1 year ago

        It’s a retroactive name just to keep the numbering scheme logical. It would be weird to start off giving the next version “1” so they added numbers to all of the old versions. 802.11n was renamed a full 15 years after it was released!

        • VanillaGorilla@kbin.social
          link
          fedilink
          arrow-up
          4
          arrow-down
          1
          ·
          1 year ago

          I wished they’d tidy up the clusterfuck that’s USB versions. Especially in combination with thunderbolt. Holy…

          • Kethal@lemmy.world
            link
            fedilink
            English
            arrow-up
            7
            arrow-down
            1
            ·
            1 year ago

            USB 3.1 Gen 1 is the same as USB 3.0. It’s like they’re trying to foster scam products. I would genuinely like to know how this bullshit naming scheme came into existence if anyone reading this happens to know.

          • kirklennon@kbin.social
            link
            fedilink
            arrow-up
            5
            ·
            1 year ago

            Do you mean to say it’s not perfectly logical that USB 3.0, USB 3.1 Gen 1, and USB 3.2 Gen 1 are all actually the same version? I wish I could travel back in time to the meeting where that was proposed and slap the person in the face until they realized the error of their ways.

      • Malkor@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        1 year ago

        802.11a was 5GHz long before Wi-Fi 5 was a phrase, and “Wi-Fi 5” as a phrase does not imply any particular frequency.

    • bjornp_@lemm.ee
      link
      fedilink
      English
      arrow-up
      17
      ·
      1 year ago

      My device always shows the WiFi number. It’s nice to know since I live in an apartment building with shared wifi. The shared wifi is 4/5 and mine is 6 so I can see at a glance if I’m connected right.

      I can’t imagine another reason it’d be useful though.

    • mordack550@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      It may be beneficial on some devices that requires low latency (like streaming to a VR device or remote gaming). I can see the difference in latency from wifi5 to wifi6 when remote gaming.

  • Sibbo@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    6
    ·
    1 year ago

    Show it for marketing. Not that this WiFi standard would matter much to most users, but if you show it there, you can still make them want it.

  • Uriel238 [all pronouns]@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    18
    ·
    edit-2
    1 year ago

    This isn’t a wrong answers only post so lets make sure everyone is aware of Internet Protocol versions 4 and 6.

    Most internet addies look like this 001.002.003.004

    That’s IPv4, the current common standard. And were running out of addresses.

    To fix this some systems are using IPv6 which adds two more numbers (and more bits per number) as well as a whole batch of protocol improvements.

    I’m pretty sure that’s what the WiFi ⁶ enumerator is about.

    …or maybe I’m wrong. All the interne6 suggests its the WiFi protocol version 6. Sorry.

    c/confidentlyincorrect

    • Dashmaybe@lemmygrad.ml
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Not only are you correct, your description of ipv4 and ipv6 sounds like if 8 year old looked at the wikipedia page of ipv6 for five minutes, and was asked to explain it in-depth a month later. I’d recommend just deleting your comment, it’s awful in so many ways.