• Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
  • VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
  • Dual 4Kp60 HDMI® display output with HDR support 4Kp60 HEVC decoder
  • LPDDR4X-4267 SDRAM (4GB and 8GB SKUs available at launch)
  • Dual-band 802.11ac Wi-Fi®
  • Bluetooth 5.0 / Bluetooth Low Energy (BLE)
  • microSD card slot, with support for high-speed SDR104 mode
  • 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
  • 2 × USB 2.0 ports
  • Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
  • 2 × 4-lane MIPI camera/display transceivers
  • PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
  • 5V/5A DC power via USB-C, with Power Delivery support
  • Raspberry Pi standard 40-pin header
  • Real-time clock (RTC), powered from external battery
  • Power button
  • memphis@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    17
    ·
    1 year ago

    Out of context, “a power button” is really funny to see advertised as a feature.

  • 332@feddit.nu
    link
    fedilink
    English
    arrow-up
    17
    ·
    1 year ago

    Man I just want to actually be able to buy a Pi 4 at non-scalper rates.

    • ripcord@kbin.social
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      Theres a bunch available in the US/Canadathis week (all week, for the first time in a very long time). Not available everywhere, but the major Pi distributors have pretty much all had some - all the pi 4 models, too.

      The drought has been easing up for a while and has been nearly over in Europe for several months. It looks like it may just about be over in NA too.

      If you’re in other countries I guess maybe it’s still pretty dry.

  • RobotToaster@mander.xyz
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    1 year ago

    No actual PCIe or M.2 connector on the board, the M.2 hat won’t be available at launch, and it appears to block the required(?) coolers from being fitted.

    • somedaysoon@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      1 year ago

      Why anyone bothers with Pi Foundation boards any longer is beyond me, there are so many better SBCs. The rockpro64 launched a full year before the Rpi4, back in 2018, and had PCIe, SATA cards, NICs, and a sweet NAS case to go with it. It could boot from USB drives right away, unlike the Rpi4, it didn’t have power supply issues unlike the Rpi4, and it had eMMC support unlike the Rpi4, among many other benefits like a faster CPU, again having launched a full year prior.

      • Bonehead@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        I still have a bad taste in my mouth from the Pine64 I bought from their Kickstarter. The thing lasted 4 months before it stopped booting. I have no faith in any subsequent products.

          • Bonehead@kbin.social
            link
            fedilink
            arrow-up
            1
            ·
            11 months ago

            There were reports that many of the original Pine64 Kickstarter boards had this bootloop problem. While I understand this was one of there first products, I still don’t want to sink money into something when better and more stable options are available.

              • Bonehead@kbin.social
                link
                fedilink
                arrow-up
                1
                ·
                11 months ago

                If that’s true then they fixed any quality issues on subsequent boards, so you questioning the stability and quality of the current boards is no longer substantiated

                Meanwhile, anyone that supported their Kickstarter got screwed.

                but I’m curious what you would consider a more stable option?

                Why would I bother when you’re obviously just going to pick it apart, just like you did with the Pi immediately after asking that question. You like the Pine64, great. Good luck with that. I won’t touch them with a 10 foot pole. That’s my opinion. Have a nice day.

    • PeachMan@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      1 year ago

      Not required. And it might block the OFFICIAL cooling case, but it’s a Raspberry Pi. There will be a hundred different custom cooling options soon.

      • Treczoks@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        1 year ago

        The problem is that the M.2 thing still is a HAT, and basically sits about 10mm above the main board, leaving no room for proper active or passive cooling - or at least making it very complicated to achieve. Putting the M.2 slot at the bottom of the main board would have been a good solution that would have avoided a lot of problems.

    • atocci@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I didn’t think they were that hard to find at the moment, I saw 5 or 6 CanaKits in Best Buy last week.

          • spacecowboy@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            Is that a bad thing? I’m brand new to the RPi world (as in, I just discovered I may want one two days ago) so I’m not sure if one model is better for certain things or are they just incrementally improved from one generation to the next. I am not tech savvy so I couldn’t answer that by looking at specs.

            • PM_Your_Nudes_Please@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              It simply may be overkill for some projects. No reason to get a 4 when a 3b or pico will do the job just fine at a fraction of the cost. Same deal with the 5; It’s more powerful, but it’s also more expensive and not every project needs the most recent version. The original goal of the Pi was to provide cheap accessible processing for whatever you may need. But as innovations keep happening, things keep getting more expensive.

              For an extreme example, you wouldn’t build a $3500 gaming PC for your grandparents who will only use it for Solitaire and checking their email.

            • RememberTheApollo@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              Depends. Most of my Pi’s are 3 or under, and they’re doing mundane tasks like printserver or VPN. This takes little power or speed. I did use a pi B+ with Kodi and that tended to choke up occasionally, I think mostly due to heat though even after applying heat sinks. The 4 and 5 should handle that job a lot better.

  • ijeff@lemdro.id
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    Hopefully they can address the stock issues but I’m not holding my breath. Would’ve also liked to see full-sized HDMI.

  • Avid Amoeba@lemmy.ca
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Flawless victory! 🙌

    This thing will make a blazing fast encrypted ZFS NAS with the 2 full-speed USB 3 ports and crypto extensions.

    • anlumo@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      1 year ago

      I don’t think Linux supports ZFS on ARM. It’s a bad idea without ECC RAM anyways.

      • Avid Amoeba@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        It does and I used to briefly run a ZFS pool on a Pi 4 in 2019. I only abandoned it due to a nasty deadlock bug that I think got resolved sometime ago. Non-ECC RAM shouldn’t be significantly worse than using say MDRAID or Btrfs with non-ECC RAM.

  • 👍Maximum Derek👍@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I think I’ve personally hit the point where PIs are like phones, there’s nothing new that I actually need but a handful of things that looks handy. Never thought I’d be excited about (effectively) a bios battery.

  • HidingCat@kbin.social
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    Just in time when I was reading about Home Assistant. Either I can get a couple of these to play with, or I just find an older Pi 4 for cheaper (and easier availability).